MFD Streamer for DCS
Stream your viewports to your second computer.
| Product: | Link: |
|---|---|
| MFD Streamer DCS V1.1 (Trail version) | Download |
| Sales Brochure V1.1 | Download |
| Manual V1.1 | Download |
F16 Gauges for DCS
Stream your F16 Gauges to your second computer.
| Product: | Download: |
|---|---|
| F16 Gauges V1.0 (Trial version) | Download |
| Sales Brochure V1.0 | Download |
| Manual V1.0 | Download |
IO Board Hardware system DCS
This is the new IO Board software for DCS V4.1.2
The new version has a new connection setup with DCS. It is full compatible with DCS-BIOS.
With this new V4.1.2 you can choose all planes that are available in DCS-BIOS.
| Product: | |
|---|---|
| IO Board tool V4.1.1 DCS | Download |
| IO Board tool V4.1.2 DCS (Latest) | Download |
To use this new V4.1.2 you need to install and run the LATEST version of DCS-BIOS skunkworks in DCS.
| Product: | |
|---|---|
| DCS-Bios Skunkworks | Website |
This new V4.1.2 has a new internal setup for communicating with our hardware.
There for you need to update the firmwares of our hardware.
Here you can download the latest firmware versions for our hardware:
| Products: | Link: |
|---|---|
| DED V4.1.1 | Download |
| IO Master V4.1.1 | Download |
| Module Master V4.1.1 | Download |
| Rotary Board V4.1.1 | Download |
| Potmeter Board V4.1.1 | Download |
| Led Board V4.1.1 | Download |
IO Board Hardware system BMS
This is the new IO Board software for BMS V4.1.1
| Product: | |
|---|---|
| IO Board tool V4.1.1 BMS | Download |
This new V4.1.1 has a new internal setup for communicating with our hardware.
There for you need to update the firmwares of our hardware.
Here you can download the latest firmware versions for our hardware:
| Products: | Link: |
|---|---|
| DED V4.1.1 | Download |
| IO Master V4.1.1 | Download |
| Module Master V4.1.1 | Download |
| Rotary Board V4.1.1 | Download |
| Potmeter Board V4.1.1 | Download |
| Led Board V4.1.1 | Download |
************************************************************************************************************************************
All hardware shipped after 15-6-2026 will have the new firmware updates for V4.1.1
With this new firmware and software release, the previous software versions below will be EOL (end of live) and loses its comptabilitie and support.
************************************************************************************************************************************
IO Board Hardware system V4.1.0 BMS (Beta Release)
Full Version 4.1.0 BETA for BMS.
BMS version only.
This is the new IO Board software for BMS Beta Release, for testing only.
With a later available firmware update, you can connect our DED box to the new software version. No seperate software needed.
With a later available firmware update, you can connect our CMDS panel to the new software version.
Instructions will be released later.
If you find any bugs or problems, please let us know.
IO Board Hardware system V4.1.0 DCS (Beta Release)
Full Version 4.1.0 BETA for DCS.
DCS version only.
This is the new IO Board software for DCS Beta Release, for testing only.
This new version has a new connection setup with DCS. It is full compatible with DCS-BIOS.
With this version you can choose all planes that are available in DCS-BIOS.
To use this new version you need to install and run DCS-BIOS in DCS. See the Installation part on the DCS-BIOS page.
Then install our new V4.0 Beta Release.
Start the new software, and make your settings.
With a later available firmware update, you can connect our DED box to the new software version. You don’t need to use the old DCS-BIOS version for the DED.
With a later available firmware update, you can connect our CMDS panel to the new software version.
Instructions will be released later.
If you find any bugs or problems, please let us know.
F16 hardware modules for DCS and BMS:
IO Board Hardware system V3.303 (Latest Release)
Full Version 3.303 (4-9-2024) for DCS and BMS
Some minor updates from the previous version.
You can use the manual from version 3.302.
IO Board Hardware system V3.302
Full Version 3.302 (9-8-2024) for DCS and BMS
When you bought a Master module before August 2024 you need to update your Master module with the latest firmware update below.
With this firmware update you can use your system with the software version 3.302 and above.
Master Modules bought after July 2024 don’t need this update. They already have the latest firmware.
Firmware update Master Module for the latest Full Version 3.302 and above
IO Board Hardware system V2.1:
Full Version 2.1 (6-4-2023) for DCS and BMS
Full Version 2.0 (23-7-2022) for DCS
Firmware update Master Module for the latest Full Version 2.1
Downloads for DED panel DCS:
Installation manual V1.11 (DED box V2.0)
Firmware V1.3 (5-3-2022 Update for latest F16 plug-in version for DCS-Bios)
Downloads for DED panel BMS:
Installation manual V1.0 (DED box V2.0)
DED connector V1.1 (for BMS 4.35)
Downloads for FFI standalone DCS: (discontinued product)
Downloads for FFI standalone BMS: (discontinued product)
FFI connector V1.1 (for BMS 4.35)
